Flood X delivers rapid water detection and automated mitigation for residential and commercial properties. This integrated sensor network helps facility managers and homeowners respond faster to leaks, roof runoff, and rising groundwater.
The platform combines hardware sensors, cloud analytics, and automated control devices to reduce water damage risk. Real time alerts and detailed reporting support proactive maintenance and insurance compliance.
| Deployment Type | Coverage Area | Integration | Typical Use Case |
|---|---|---|---|
| Wireless Battery | Up to 30 sensors per gateway | Wi‑Fi, Zigbee, Z‑Wave | Easily added to existing buildings |
| Hardwired Ethernet | Up to 80 sensors per gateway | Modbus, BACnet, ONVIF | New construction and data centers |
| Solar Powered Kit | Outdoor zones up to 5 acres | LTE, LoRaWAN, Satellite | Remote facilities and green roofs |
| Retrofit Kit | Single room to zone level | Relay outputs, dry contact | Protect basements and mechanical rooms |
Real Time Monitoring Capabilities
Sensor Types and Placement Guidelines
Flood X supports conductive probes, float switches, and ultrasonic depth sensors. Ideal placements include under sinks, near HVAC units, and at basement perimeter drains to capture early signs of intrusion.
Alert Threshold Configuration
Users can set low, medium, and high water level thresholds tied to escalating notifications. Integration with building management systems allows automatic activation of sump pumps and diversion valves when levels approach critical zones.
Automated Mitigation Strategies
Valve and Pump Control Logic
Automated scripts can isolate water lines, trigger condensate pumps, and redirect roof drainage. Logic modules support timed, event based, and predictive modes informed by weather data feeds.
Fail Safe and Redundancy Design
Dual gateway configurations provide backup connectivity, while local battery storage sustains operations during power loss. Regular diagnostics report sensor health and battery status to avoid false negatives.
Integration With Building Systems
BMS, SCADA, and IoT Platforms
Standard APIs and native drivers push water event data into SCADA dashboards, CMMS records, and digital twin environments. This visibility helps teams correlate leaks with occupancy patterns and maintenance schedules.
Compliance and Reporting Features
Prebuilt templates align with insurance inspection checklists and local building codes. Automated PDF and CSV reports capture timestamps, sensor IDs, and actuator actions for audit trails.
Operational Best Practices
- Install sensors beneath plumbing fixtures and at low points in mechanical rooms
- Configure tiered alerts to match incident severity and response team availability
- Schedule quarterly valve and pump activation tests to verify automated mitigation
- Archive historical sensor data to identify recurring moisture patterns and plan preventative maintenance
- Document integration settings and backup power test results for insurance and compliance audits
FAQ
Reader questions
How quickly does Flood X detect a leak?
Sensors sample every 30 seconds and push alerts within 60 seconds when thresholds are exceeded, enabling near real time response.
Can Flood X work in areas with weak Wi‑Fi signal?
Zigbee and LoRaWAN extenders maintain connectivity, and the gateway stores 48 hours of data locally until link recovery.
What maintenance do the sensors require?
Annual cleaning of probes and inspection of float mechanisms keeps false positives low, while battery replacements occur every two to five years depending on usage.
Will Flood X integrate with my existing fire alarm panel?
Dry contact outputs and BACnet interfaces allow direct linkage to most commercial panels, enabling water events to trigger evacuation and HVAC shutdown protocols.